Box Of Synths manual

Box Of Synths manualReference

Troubleshooting

Plain answers to the things that most often go wrong: no sound, a design that did not arrive, tokens, your own key, files and the look of the window.

Each answer here rests on how the app behaves. If your situation is not here, the page for that part of the app explains it in full. The messages the app shows are on Messages and errors.

No sound

I press keys and hear nothing

Check these in order.

  1. Is the sound playing? Click a key of the on-screen keyboard. Open it with Cmd/Ctrl+K or by clicking the thin strip. While a note plays, the waveform display shows LIVE and the level bar fills. If they move, the synth is making sound and the problem is after it, in your speakers, your host or your audio settings. See The keyboard and Waveform, mode and voices.
  2. Is the level turned down? Open the Level block. Check Gain and Output, and check that Limiter is at 0 dB, which is off. See Level.
  3. Is the oscillator silent? An oscillator with Level at 0 makes no sound. On the filter card, a Cutoff turned right down, or a strongly negative Envelope, can close the sound. See Engine: oscillators and Engine: filters.
  4. Is the volume envelope closed? A Sustain of 0 means a held note dies away after its decay. A very slow Attack keeps a note silent for a while. See Transpose and the envelopes.
  5. Is Blend at 0? The Blend slider under the Effects title mixes the whole effects chain with the plain synth. See Effects.

Only one note plays at a time, or my chord loses notes

Open the Waveform block. Mode set to Mono plays one note at a time. In Poly, the Voices menu limits how many notes can sound together, from 1 to 16. Set it higher. See Waveform, mode and voices.

A note will not stop

Click the waveform display. Every sounding note stops at once. A long Release in the volume envelope also keeps a note ringing after you let go. See Waveform, mode and voices.

The sound is too quiet, too loud or clipped

Use the Level block. Gain sets the sound's own level before the effects. Output sets what leaves the synth and is the same control as the fader line on the level bar. Limiter holds the output under the dB level you set, and it is off at 0. If a loud chord or a strong effect runs past the level you want, lower Output or lower the Limiter ceiling. See Level.

A dial or an effect seems to do nothing

  • A greyed dial has no effect right now, and its hover tip says why. Pulse width only works on the Pulse wave, FM index and FM env work once FM from names an oscillator, and Unison and Spread do nothing on the Harmonic wave. An oscillator whose Level is 0 greys every dial except Wave and Level, unless another oscillator uses it for FM.
  • A switched-off effect is dimmed, and its dial is disabled. Click its power glyph to switch it on.
  • Some effects do nothing at an amount of 0. OTT at a depth of 0 and Fold at an amount of 0 leave the sound untouched.

A design did not arrive

The sheet says "Design could not be completed"

The red line under it says why. Your words are back in the chat box, and your sound has not changed. Press BACK. Find the line on Messages and errors, where each one has a next step. The most common causes are no connection, a refused key, or the site being down. While the site is down, a red band under the header says so, and the built-in database still designs.

I pressed Generate and nothing seems to happen

While a design runs, the chat box is grey and says Designing…. If another request is ahead of yours, it says Queued, one moment. To stop a design, press Esc or CANCEL on the sheet. The sheet covers the window until the design finishes or fails. See The chat.

The designer answered in words and left my sound alone

When you are in Edit with the built-in database, and the words do not match anything it can change, the sheet says I kept your sound and gives examples such as brighter, darker, fatter or more reverb. Reword your request with words like those. To make a new sound, switch to Generate. See The chat.

I want the sound back as it was

Press undo in the header, or Cmd/Ctrl+Z. Every design, drag and typed value is one undo step. Every design is also a version in the history table of the current sound, and clicking a row loads that version. See Browser: Current and The header.

Tokens

I ran out of tokens

When you are out of tokens, a TOP UP key appears at the right of the chat box. It opens our tokens page in your browser. You can also see your balance, and top up, in Settings, Account. The built-in database carries on designing for nothing. See Sources, tokens and what a design costs.

The app asks about "the same words again"

You sent words that match a recent request on tokens. The card says so and asks if you want to spend tokens on another result. SPEND AGAIN sends it once more. CANCEL keeps your tokens, and the earlier result is in the history. See Agreements and confirmations.

It says to sign in

Tokens need a Box Of Synths account. Open Settings, Account and press SIGN IN, or pick the source again so the sign-in page opens. Sign in on the page in your browser and press CONNECT. Everything except tokens works without an account. See Settings: Account and privacy.

If you remove this computer from your account on our site, the next design on tokens ends with the design sheet simply closing. The app forgets the account key. Sign in again to use tokens. Until then, the next design on tokens says Sign in to design on your tokens. Your patch has not changed.

My own AI key

The app says my service did not accept the key

Open Settings, Designer, pick My own AI key, and paste the key again in the Key box. The key may be mistyped, expired, revoked or from another account. Also check Endpoint, which has to be a secure web address, and the Model name. Your sound has not changed. See Settings: Designer, source by source.

The model list is empty, or a design runs out of room

  • Empty list. The line under Model says why. With no key it reads Add your key and its models are listed here. You can type a model name too. Press Refresh after you add the key, or type a model name yourself.
  • A reply that ran out of room. Raise Max reply tokens on your own key in Settings: Advanced, or ask for something simpler. A bigger window is your call and your bill.

Files and library

Where are my sounds, and what if I moved them?

Your library is the Box of Rules folder, then Synths, inside your Music folder, unless you chose another in Settings, Library. Choose there does not move your files. If you chose a new folder and your sounds seem gone, they are still in the old folder: copy them across. See Files and folders.

I want help, and I am asked for diagnostics

Open Settings, Advanced and press Copy diagnostics. The line under the keys reads Copied. Paste the block into your message. It holds your version, your source, your folders and your system, and never your key. See Settings: Advanced.

A warning card stopped appearing, or I changed a setting by mistake

  • Warning cards. Switch synth? and Leave this new synth? have a Do not ask again tick. Reset dialog warnings in Settings, Advanced brings both back.
  • A setting changed by mistake. Press Revert at the top of Settings. It puts the settings back the way they were before your last change. The app keeps up to 30 steps, and the key is dim when there is nothing to put back. See Settings: Designer.

Looks and window

The window is too big or too small

Open Settings, Appearance and change Window zoom. It runs from 75% to 175%, and starts at 120%. See Settings: Appearance and themes.

The keyboard at the foot has gone

Show the keyboard in Settings, Appearance is switched off. Switch it on. While it is off, Cmd/Ctrl+K does nothing. See The keyboard.